S13/180sx ナックルアダプターキット

商品説明The V2 GKTECH roll center correction kit is now made from 1030 forged steel and provides 1.57"" (40mm) of roll center correction,1.57"" (40mm) of bump steer correction and also re-positions the steering arm to increase steering lock. With two different pick up points for the tie rod, this now offers two settings, allowing for more aggressive steering response and less ackerman which will provide faster steering!

The roll centre correction kit bolts up to the bottom of your standard knuckle and can be removed with no ramifications at all. Circa 60+ degrees of lock is achievable without offset rack spacers once the factory LCA lock stop is removed but if you"re running lots of camber or caster using our offset rack spacers is a good idea to avoid steering bind.

With supporting modifications these can see similar lock to V4 drop knuckles!

With the introduction of our NEW price, they are by far the cheapest way of getting both roll centre correction and lock!

They can be seen here in action on one of our daily driven S13"s. This car featured standard LCA"s and OEM lock stop, slip in rack spacers and the RCCK:
https://www.instagram.com/p/BqyCy72nnut/

Vehicle Compatibility:
- Nissan 180SX
- Nissan S13 Silvia

NOTE: These will increase camber as it pushes the bottom of the wheel out 0.98"" (25mm) so best to only use with adjustable camber tops.
NOTE#2: If you are running S14/S15 knuckles in your car then you will need the S14/S15 RC correction kit as these are knuckle specific

弊社HPもご覧ください コチラ
発送詳細■佐川急便送料元払い（送料は配送方法欄から確認が可能です）
同梱発送をご希望の場合にはオーダーフォームにご入力のうえ